Rename the components using the Name tool button and the component values, such as the resistor's values, using the Value tool button.
Figure 14.11
You can rotate the components and arrange them in a logical fashion using the Rotate tool button and the Move tool button. This is how my arrangement looks.
Figure 14.12
The component names and values are listed in the following table.
|
Component |
Name |
Value |
|---|---|---|
|
S1 |
NO CHANGE |
NO CHANGE |
|
S2 |
NO CHANGE |
NO CHANGE |
|
S3 |
NO CHANGE |
NO CHANGE |
|
S4 |
NO CHANGE |
NO CHANGE |
|
R1 |
NO CHANGE |
1.5K |
|
R2 |
NO CHANGE |
1.5K |
|
R3 |
NO CHANGE |
1.5K |
|
R4 |
NO CHANGE |
1.5K |
|
R5 |
NO CHANGE |
360 |
|
R6 |
NO CHANGE |
360 |
|
LED1 |
NO CHANGE |
NO CHANGE |
|
LED2 |
NO CHANGE |
NO CHANGE |
|
U1 |
NO CHANGE |
ATMEGA16 |
|
U2 |
NO CHANGE |
NO CHANGE |
|
C1 |
NO CHANGE |
0.01 |
|
C2 |
NO CHANGE |
0.01 |
|
THROUGH HOLE CONN1 |
POS |
NO CHANGE |
|
THROUGH HOLE CONN2 |
NEG |
NO CHANGE |
Figure 14.13
